Hdmi optical isolator 1080p#
Our digital signal isolator products provide up to 5kV of isolation and support data rates up to 200Mbps. The HDMI Optical Isolator (500462) allows HDMI equipment to be completely isolated and connected up to 984ft (300m), while allowing a unidirectional communication (with no return signaling) via one (1) LC 50/125 m OM3 multimode fiber cable in a point-to-point configuration at 1080p resolution. Get Best Price and Quotations for Optical Isolator 2303 LH PS D in. Isolation ICs are commonly used in industrial communications and medical applications. Enclosure Aluminium: Dimensions 3.27" x 1.97" x 0.75" (83 x 50 x 19 mm) Isolation ICs protect circuits from high common-mode transients and faults and eliminate ground loops.Temperature Operating: 0° to 55☌ Storage: -20° to 85☌.
Power Consumption: Transmitter: 1.35 Watt Receiver: 1.15 Watt.Power Supply: Two (2) 110-240V/5VDC power supply with interchangeable blades.
Hdmi optical isolator full#
USB isolators are currently limited to 96kHz sample rates (USB Full speed), so i2S isolation is the only isolator type that can handle high samples rates, up to 384kHz. This will prevent ground issues and reduce noise. Cable One: (1) Multimode fiber 50/125 æm OM3 cable required Also included in the interface is a isolator chip (ISO7240) that will keep the ground from HDMI and TTL sides separated. HDMI Optical Isolator HDFX-350 Order number: 2012405 HDMI Optical Isolator HDFX-350 galvanical isolation of medical electric devices Supports HMDI 2.These isolators offer 1 MW/cm 2 CW damage threshold and 10 J/cm 2 10 ns or 1 J/cm 2 8 ps pulse damage thresholds. Maximum Distance Based on a maximum length of 6.6 ft (2 m) of HDMI cable per end: 480i/p: 984ft (300m) 720p, 1080i: 984ft (300m) 1080p 8-bit: 984ft (300m) 1080p 12-bit deep-color: 984ft (300m) 4K 24,25, 30Hz 984ft (300m) Our high power Faraday optical isolators can be used in the 1010 nm to 1080 nm wavelength range and provides double escape ports for applications where rejected power exceeds 0.5 W.Connectors: RX Side: One (1) HDMI receptacle One (1) LC Fiber connector (input only) One (1) 2.1mm power connector. The HDMI Optical Isolator (500462) allows HDMI equipment to be completely isolated and connected up to 984ft (300m), while allowing a unidirectional communication (with no return signaling) via one (1) LC 50/125 OM3 multimode fiber cable in a point-to-point configuration at 1080p resolution.Connectors: TX Side: One (1) HDMI receptacle One (1) LC Fiber connector (output only) One (1) 2.1mm power connector. HDMI 2.0 optical fiber detachable extender, HDFX-350, extends HDMI 2.0 signal up to 200m (656feet) and transmits 4K UHD (4096x2160) at 60Hz over one duplex.Copy Protection: Do NOT Support HDCP protected content.Devices: DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI.
0 kommentar(er)
